1/4 Headed Anchor Weld Stud

Headed Anchor Studs are used in all types of concrete connection. They can be welded to a flat surface, or in the fillet, or on the heel of an angle.

Length is before weld. Stud diameters (D) 1/2″ and below will be 5/8″ will be approximately 1/8″ shorter after welding. 5/8″ will be approximately 3/16″ shorter after wedling. Made to order lengths available upon request.  

Material – Low carbon steel ASTM A108, 1010-1020.  Headed anchor studs are also available in stainles steel.

Headed Anchor

Clear
Part Number: N/A Categories: ,

Description

Stud Specifications
Stud Diameter (D) Stud Length (L) Part Number 1000 Pieces Weight (lbs) Pieces Per Box
1/4 1 1/8 HA O25-0112 22 2000
2 11/16 HA 025-0268 43 1000
4 1/8 HA 025-0412 63 600

Special sizes available upon request

Mechanical Property Requirements
Type A1 Type B2
Tensile Strength 61,000 psi minimum 65,000 psi minimum
(420 MPa) (450 MPa)
Yield Strength (0.2% offset) 49,000 psi minimum 51,000 psi minimum
(340 MPa) (350 MPa)
Elongation (% in 2 in.) 17% min 20% min
Elongation (% in 5x dia.) 14% min 15% min
Reduction of Area 50% min 50% min

 

* Type A studs shall be general purpose of any type and size used for purposes other than shear transfer in composite beam design and construction.

** Length is before weld. Stud diameters (D) 1/2″ and below will be 5/8″ will be approximately 1/8″ shorter after welding. 5/8″ will be approximately 3/16″ shorter after wedling. Made to order lengths available upon request.

Additional information

Stud Diamater

1/4